Author Archives: Webmaster

earthquake load

Earthquake load

Earthquake load

Buildings and their components shall be designed and constructed for earthquake impacts in accordance with the National Building Code of Iran and earthquake loads. The design-based earthquake is an earthquake that is less than 10 percent likely to occur within 50 years of the building’s useful life. Also, buildings of high importance or taller than 50 meters or more must meet the specific criteria for the impact of an “earthquake” level of operation that is more than 99.5 percent likely to occur in 50 years.

According to national building rules and regulations, Chapter Six, Earthquake Side Effect Sections Affecting Non-structural Components article 6-7-2-8 and figure 6-7-7 above Article, Connections of prefabricated structural elements are considered one (1) along each line.

  • Building with very high importance factor(I = 1.5)

1-      Building with very high importance factor (I = 1.5)

Buildings that are definitely in use after the earthquake Such as hospitals, firefighting, posts, and telecommunication centers, terminals, power plants, chemical warehouses, govern orates, and municipalities.

  • Building with high importance factor(I= 1.4)

Schools, universities, hostels, military centers, prisons, and museums

  • building with a medium important factor (I=1.2)

Stadiums, cinemas, theaters and seminar centers

  • building with a Low important factor (I=1.1)

Residential homes, commercial buildings, hotels, etc.

Category : Structural strength


The load weight of glass

The load weight of glass

The load weight of glass

The weight of the glass mounted on the horizontal profiles results in a load that must be taken into account in the calculations.

Category : Structural strength


wind load windows curtin wall

Wind load

Wind load

Buildings and structures and all their components and coatings shall be designed and constructed for wind effect, in accordance with the requirements of the National Building Code of Iran (Chapter on Wind Loads).

What is wind load:

Wind load is the load, in pounds per square foot, placed on the exterior of a structure by wind. This will depend on: The angle at which the wind strikes the structure. The shape of the structure (height, width, etc.)


Engineering Department

Engineering Department

Engineering Department

Considering the wide range of production profiles of this company, we proudly announce that as the first Iranian manufacturer along with the leading aluminum industry in the world, we are launching and giving a unique service to our customers for the first time in the world.

Technical and Engineering Unit, using efficient and well trained personnel, using the most specialized computing and design software available in the world (ORGA DATA), receiving architectural drawings of each project and consulting with designers based on technical requirements and in accordance with national standards and international standards. Performs precise calculations, estimation and selection of consumer profiles and other attachments such as rubber, glass, sealant, fixture and other connections And with the most economical way of calculating and minimizing the out-of-pocket consumption, it gives the customers.

Calculation of loads on Curtain Wall structures and technical information

Curtain wall glass facades are one of the ways to cover the building’s facade. Vertical profiles in these types of systems must be resistant to dynamic loads, wind and glass weights.

To calculate the resistance, it is first necessary to identify the loads.

The calculated loads in the glass facade include the following:

  • Wind load
  • The load weight of glass
  • Earthquake load
  • Snow load

aluminum factory automatic machines

Labeling Machine|Profile Sewing Machine

Automatic Labeling Machine

By applying this coating, up to the final destination (construction project), any damage to the profile surfaces is prevented and the necessary protection is provided.

Thermal Break Profile Sewing Machine

Our Thermal Break Profiles production line provides our customers with the ability to make different types of doors and windows using Thermal Break sections with equal quality to European sections.

aluminum factory automatic machines


aluminum coloring paint line factory - iran

Full automatic paint job line

Using a powder coating line electrostatic ally, the company has been able to paint profiles up to a maximum of 7 meters.

This section contains the following units:

  • Chromium paint substrate equipped with tubs
  • Drying Furnace
  • Full automatic gas spray paint cabin
  • Preheating Furnace
  • Baking Furnace

aluminum coloring paint line factory - iran


valid aluminum company iran

About Valid Aluminum Company

Valid Aluminum Brand

The Valid Aluminum brand was launched in 2009 with the installation of multiple fully automatic lines and the ability to produce all custom sections. And this factory is ready to fulfill various orders of dear customers from all over the country.

Here are some of the capabilities of this company:

  • Ability to produce special aluminum sections and Thermal Break with the most up-to-date technology in the world
  • Electrostatic and anodizing staining ability
  • Manufacture and supply of all kinds of fittings and machines for door and window manufacturing
  • Advice on producing custom doors and windows

The Valid Aluminum brand has the following units:

  • Design, production, and manufacturing of special profile molds in Iran and Turkey
  • 2800 ton extrusion press machine
  • Full automatic tape table, extrusion and cutting machine
  • aging furnace for 9-meter long aluminum profile
  • Fully automatic electrostatic paint line with robotic spraying of 7 meter
  • Full automatic line for producing Thermal Break profiles
  • Automatic labeling machine
  • Profile packing machine