Author Archives: Webmaster

composite facade iran

Dry facade

Dry facade

These types of facade systems dramatically reduce heat dissipation in the cold climate through insulated layer sand prevent the creation of thermal bridges at critical surfaces such as joints of flooring and the outer wall.In hot weather, implementing of dry facade prevents heat transfer into the building. The outer shell of the dry facade reflects most of the sun’s rays exposed to the surface. Also in the dry facade system, Ventilation of cool air inside the open space reduces the heat absorbed by the building and creates two shell modes in the facade.

These systems are highly versatile in terms of design, color, texture, and installation pattern techniques. For example, these systems can support a large-scale geometric pattern of square, rectangle, etc. (Horizontal or vertical). A wide range of finishing qualities, from glossy to matte finishes, as well as a variety of unlimited colors can be provided through the use of products such as Porcelain ceramics, aluminum composite sheets and more.

  1. Composite Aluminum System

Due to the importance of designing earthquake-resistant structures in Iran and the Viewpoints of construction experts to reduce the weight of structures, the importance of using high-tech, and lightweight materials in buildings has increased dramatically and the demand for this product is increasing.


The aluminum composite product is widely used. Including office buildings, commercial, industrial, educational, health, airports, terminals, subway stations, domes and special buildings. along with new technologies, architectural interests, and customer demand, building materials are constantly evolving. These panels are among the newest building materials and one of the newest proprietary products offered.

The Valid Aluminum brand has designed and manufactured special systems for installing this type of facade.

2- Dry ceramic system (Porcelain)

One of the ways to prevent energy loss and optimize its use in buildings is to choose the right materials for the interior and exterior coatings of the building.However, various materials have been used in these coatings so far.Nowadays, due to the many advantages of ceramic porcelain plates, such as much lower water absorption and frost resistance, erosion and corrosion resistance, high mechanical strength, The beauty and variety of colors and designs, no need for special maintenance and ease of replacement, make them widely used in the regular exterior and interior facade in the form of air pass.

The Valid Aluminum brand has designed and manufactured special systems for this type of facade.

Alu Kuta system

Kuta is a new generation of extrusion material made of aluminum plates. With its endless variety of colors, this type of facade is produced in a variety of sizes and gives beauty and uniqueness to the buildings.

Its lightweight is another advantage of this system. It weighs only 8 kg / m 2, along with its ease of use and affordability, it has become one of the most popular choices for architects.

aluminum doors & windows - iran

Aluminum doors and windows

Aluminum doors and windows

The conventional aluminum window, despite its solid strength, has a conductive property that results in high heat exchange between the interior and exterior, leading to a large amount of energy loss. To fix this problem, a new aluminum window called Thermal Break has been released worldwide. This results in thermal fracture by maintaining high strength of aluminum by adding poly amide intermediate insulation layer. The word Thermal Break also comes from the same root.

These windows consist of two inner and outer layers, which are separated by a poly amide insulator and become thermal insulated. Another advantage of this Thermal Break profile is that it reduces the dew point on the window surface. The humid air cools very quickly and the frozen steam appears as tiny droplets on the cold surface of the profile. The more we try to keep the inner surface of the profile warmer, the more it decreases. The special privileges mentioned along with the unique beauty of this product are such that Thermal Break window system are widely used in most modern buildings.

aluminum windows iranian aluminum doors & windows aluminum doors

Frameless building system

Curtain wall

Curtain wall

  • Frame less system

This system is seen from the outside as a fully integrated glass.That will make the building look beautiful and homogeneous. For this reason, today the use of this type of glass facade in modern buildings has received much attention.

The facade is manufactured as modular panels in the factory under strict supervision and after installation, the glass is shipped to the project site.

Reducing human error and preventing material overload and rework are other advantages of this type of system.

  • The face cap system

In the face cap system, there is no aluminum frame around the glass and the glass is placed directly on the Curtain Wall structure And a retaining profile that screws onto the base of the Lamella holds the glass and prevents it from being overturned And by that, the building’s facade is also fully sealed and air-conditioned. Various caps with widths of 5 cm and various lengths and shapes are also mounted on this holder.

The advantages of the face cap system over the Frame less system include the following:

1- Faster facade implementing

2- Lower cost

3- Possibility of using decorative caps between the glass along the horizontal and vertical direction

4- Possibility to change different visions of vertical and horizontal lines between glass by changing the color and type of caps or removing one of them

With this capability, the architect can emphasize one of the vertical or horizontal lines in the glass views. For example, in facade that are much higher than their width, Can be installed with light-colored cap, larger cap on vertical lines and complete removal on horizontal lines or More emphasis on vertical lines can make greater facade height in the viewer’s eye or vice versa in facades that are much wider than their height, we can by installing in bright color cover or larger on horizontal lines And its complete deletion in vertical lines or With more emphasis on horizontal lines can make greater facade Width in the viewer’s eye. Or, using smaller, identical caps, darker and closer to the glass color, reached a uniform glass surface.

Frameless building facade framless building view map of fremless glass facade

Curtain Wall facade bulding iran

Glass facade

 Glass facade
The facade in the building is a barrier between the physical and climatic conditions outside (Weather conditions) and indoors and also it is as a representation of the voluminous identity and beauty of the building. The building’s facade has a variety of forms that combine different materials to give the building meaning. Use of sunlight and sun energy in buildings is one of the most fundamental ways to optimally use energy in architecture and not using this achievement in architecture deprives us of transparency, and deprives buildings of the benefits of warming. Glass facade (Curtain Wall) is one of the most beautiful modern building facades that has unique features and properties due to the use of glass and aluminum. Strength, ability to use natural light, keeping wind and rain away, durability and No need for maintenance, optimum Thermal and acoustic insulation, anti-fire and fire safety, earthquake resilience and Visual beauty and attraction are among these features.

Aluminum profiles are used instead of the iron frame in the Curtain Wall facade. The facade was lattice and it is a combination of aluminum and glass.

The benefits of this system (Curtain Wall) include:

  • Providing modulation based on the original design and calculating effective coefficients on structural stability
  • Equipped with decorative caps for a more beautiful look
  • Manufactured in Thermal Break, Simple, Spindle shape and …
  • Equipped with air and rainwater discharge system
  • Ability to install glass of different thicknesses
  • Equipped with EPDM tires for higher resistance
  • Easy to use and easy to install
  • Usability as a structural element
  • This type of facade engineering does not require a substructure (self-support) and has unlimited color variations
  • Thermal and acoustic insulation of buildings

aluminum color

Electrostatic aluminum powder color variation

Please download the color selection file and send us the color code to order:

Download Electrostatic Aluminum color picker file click here

Go to anodized aluminum color page

Electrostatic aluminum powder color variation:

Electrostatic aluminum powder color   

aluminum color

aluminum color variation

colored aluminum paint line

Fully automatic painting line

Fully automatic painting line

The company has been able to paint aluminum profiles in an electrostatic powder coating line, in the following process:

  1. Chromium paint substructure equipped with tubs
  • Drying Furnace
  • Spray painting cabin with fully automatic garners
  • Preheating Furnace
  • Baking Furnace

Quality Control Unit

After leaving the production line, the products will be inspected carefully by the quality control unit and will be allowed to exit after the product conforms to the standard and technical requirements. The precise operation of this unit will ensure the customers of all products manufactured by the Valid Aluminum brand.

aluminum automatic bar bench Extrusion unit

Extrusion | automatic bar bench

Extrusion unit

This machine is the main base for the production of aluminum profiles, including pre-heat cast billet furnaces and extrusion presses. The technology of these machines is similar to modern European technology and it guarantees the quality of production profiles.

Fully automatic bar bench

This line is equipped with a smart machine and advanced automatic tables for transferring profiles produced to the stretcher machine for stretching and transfer to the tester machine for high precision cutting at arbitrary sizes.

aluminum automatic bar bench Extrusion unit

Category : Factory Units

iran aluminum Production unit

Iran Aluminum Production

Production unit

This unit can produce all kinds of aluminum sections with the latest production machinery and highly trained specialists and provide our customers with the best quality products in the shortest time worldwide.

Consumables Billet

The consumables Billet in the company’s production line is the best quality domestic and foreign materials that meet all the standards required to improve surface quality.

Aluminum Mold Design and Manufacturing

Mold Design and Manufacturing

Mold Design and Manufacturing Unit

Upon approval of the drawings from the technical engineering unit and sent to the molding unit, the unit operates in accordance with international standards with up-to-date equipment and specialized personnel. After being approved by the quality control unit, it is sent to the plating department for increased mold strength and stability.

Titration is one of the complementary releases of the molding unit that will ensure product quality and increase customer satisfaction.

Aluminum Mold Design and Manufacturing

snow load

Snow load

Snow load

Base snow load calculation:

Snow load is the snow weight that is less than 2% likely to exceed in one year based on statistical data available in the area.

The snow load calculation will be based on the sixth section of the National Building Code of Iran.

Category : Structural strength